Automation, defect reduction, repeatability, MES information management and simplified operation continue to be market drivers across all aspects of board assembly manufacturing. Electrovert’s patented Auto Exit Wing feature provides the level of automation that allows an automated adjustment of the laminar wave flow to match the board velocity for reduced defects. The recipe-controlled set-point ensures the wave dynamics are automatically adjusted ensuring wave flow dynamics are optimized for each PCB type and application.

Auto Exit Wing (English) - brochure

Auto Exit Wing (Chinese) - brochure

Click here to watch video

The Deep Wave option innovative system provides the ability to pump up to 20 mm wave height.  

The Deep Wave option overcomes the challenges associated with deep pockets and masking and provides a wave depth necessary to achieve topside hole fill.  In some applications the 20 mm capability has removed the need for an additional soldering process.  The Deep Wave is a recipe-controlled parameter in the machine software that can make changes between different wave heights within 10 seconds. The Deep Wave option complements other Electrovert value added options including ExactaWave (automatic wave height adjustment), adjustable wave pump RPM’s settings, forced convection blower speed adjustments and precision selective fluxing that can all be adjusted on-the-fly. 

Deep Wave - Brochure

The DwellFlex 4.0 is the first solder nozzle designed specifically with Industry 4.0 automation in mind. The patented design enables the length of the wave to be adjusted on-the-fly as variable board types are run through the wave. This ensures solder contact time is optimized for a high-mix of board types without changing conveyor speeds.

The DwellFlex 4.0 provides the highest level of soldering capability for thermally challenging and difficult solder applications. The single wave design at maximum opening delivers the most thermal energy and longest dwell time in the industry.

The DwellFlex 4.0 benefits include:

• Minimizes changeover downtime in high-mix applications
• Eliminates lost production time associated with conveyor speed changes
• Allows ability to optimize the profile through the preheat section and adjust wave contact time for an optimal soldering process
• Change contact length between high mass pcb’s to low mass pcb’s in less than 10 seconds
• Varying the wave length on-the-fly eliminates preheater changeover time
• Higher solder quality results – no temperature dip associated with the gap in a typical dual wave configuration
  • Reduced defect opportunities
  • Flexibility to provide precise dwell time for any board
• Available on Electra and VectraElite (EC4 and VC3)
• Compatible with full and short N2 tunnels
• Field upgradeable

Click here to watch the DwellFlex 4.0 video

DwellFlex 4.0 - Brochure

DwellMax 4.0 is a patented process solution that meets the challenges of lead-free wave soldering. The extra-wide chip nozzle and modified UltraFill 4.0 nozzle are ideal for soldering thick, high thermal mass circuit boards, increasing throughput capability. With conventional wave soldering technology, thick multi-layer and/or high thermal mass circuit boards are often accompanied by high cost from low yields, slow production speeds, rework costs, and the collateral damage associated with a rework loop. The innovative design of DwellMax 4.0 alleviates these problems and provides better PTH fill at significantly faster conveyor speeds. The benefits of the nitrogen tunnel include improved solder wetting and reduction in dross by up to 83%.

DwellMax 4.0 benefits include:

• Compatible with Full or Short Nitrogen Tunnel
• Increased topside hole fill;
• Reduced defect rates;
• Highest wave-height capability in industry;
• Higher production rates;
• Significantly less dross;
• Reduced solder usage;
• Reduced flux usage.

Electrovert’s DwellMax 4.0 is the key to a better bottom line through fewer defects and maximized productivity.

ExactaWave is a patented, high-reliability sensor with closed-loop feedback designed to control the solder wave height relative to the board. Its ability withstand temperatures up to 300° (573°F) makes it perfectly suited for precision soldering applications.

The ExactaWave system compensates for changes in solder level, dross accumulation and set-up changes made during maintenance. Thus, a set-point entered in a recipe always produces the same result. The ExactaWave’s seamless integration into the soldering machine’s software also allows it to operate in standby mode and is a parameter that can be data logged with trending capability.

Electrovert’s Electra, VectraElite, and VectraES2 offer a wide range of features and capabilities that increase the value of the wave solder process.  The value is achieved through reliability, features that provide process flexibility, maximize process control, and ultimately save time and money.

Value-based features include:

• Lifetime warranty on solder pot casting (applies to original owner);
• Recipe-driven automatic lead clearance;
• FloLift™ technology increases the upward force of the waves just as the PCB passes over the wave.  This feature promotes maximum topside hole fill;
• Stand-by-mode of solder waves that reduces the rpm of the solder wave just until the PCB is near the solder pot.  This feature reduces dross generation when no PCBs are being soldered;
• Combination 2d/1d bar code reader can be combined with data logging for complete process control and automation;
• Data-logging and trending of critical machine parameters;
• Common Windows® based operating system and common GUI software across all Electrovert products (Wave, Reflow, and Cleaning).  This is a significant time saver to operators and engineers.  Minimal training is required when shifting from one product to another.
• Common I/O interface across all Electrovert products (Wave, Reflow, and Cleaning).  This is significant to maintenance personnel and significant in that common spare parts can be used from one product to another.

Electrovert’s flux flow monitor is intended for applications that flux flow verification is critical to the wave soldering process. The feature provides an accurate method of verifying repeatability of the flux flow rate and flux volume on a board-to-board basis. The flux flow monitor uses an innovative non-contact type sensor. This approach allows the feature to be compatible across a broad range of flux types and spray technologies.

Flux Flow Monitor Features:

• Compatible with a broad range of flux types:
  • Alcohol and water based
  • Low to high solid content
  • Mild to highly corrosive
• Available on Electra, VectraElite, and VectraES (single and dual-head type fluxers)
  • ServoJet
  • ServoSpray
  • ServoSonic
• Feature is field upgradable (check with the factory on vintage and configuration of machine)

Flux Flow Monitor - Brochure

Electrovert’s full nitrogen tunnel feature includes all the same features and benefits of the short tunnel plus a fully inerted preheat section. The innovative approach to inerting the preheat section allows for forced convection preheat in preheat location #1 (closest to solder) and in both upper/lower positions.

Benefits of the nitrogen tunnel include:

• Available for use with UltraFill 4.0, DwellMax 4.0 and DwellFlex 4.0 nozzles
• Significant reduction in dross and maintenance in the solder module area with pay-back in less than 6 months (depending on application and alloy);
• Complete and easy access to all preheat, fluxer, and solder pot area from rear of machine
• Fully inerted tunnel Inerted environment allows the use of milder fluxes and/or a reduced amount of flux applied;
• Optional O2 analyzer enables data logging of critical parameters specific to the solder wave area;
• Full Tunnel is field upgradable ( check with factory).

The Heavy Duty Conveyor is designed to handle heavier loads of up to 91 kg (200 lb) while still maintaining the benefits of a single continuous conveyor. The use of titanium universal V/L fingers with a choice of 3mm or 6mm L, along with precision linear bearing support cross shafts and fine-pitch screw shafts are robust with excellent parallelism for the conveyor. The high-strength hard-coat anodized aluminum extrusion used in the rail and tunnel support structure are field proven in demanding production environments for its durability and stability.

The Electra is capable of up to 2.4 meters (8 feet) of bottom side preheat and up to 1.8 meters (6 feet) of topside preheat.  Multiple forms of preheat are offered for complete process flexibility; these include IsoThermal™ forced convection, fast response IR, and Infrared radiant.  All preheat modules are ‘plug and play’, allowing preheat configurations to be located in any position, location, and 100% interchangeable.

Electrovert’s quick change solder pot allows the use of two or more alloys with easy change-over of interchangeable solder pots.  This feature is designed for safety, beginning with a robust cart that includes locking devices and safety bars to secure the pot.  The quick-change electrical and nitrogen utilities simplify change-over while the warming station (included) significantly reduces changeover time.

Quick-change pot benefits include:

• Use of multiple alloys;
• Built-in safety features;
• All critical process features of the wave solder machine remain integrated between the multiple solder pots:
  • Standard wave features such as FloLift, stand-by-mode, RPM control, alarms, and data logging;
  • Auto-lead clearance;
  • Optional ExactaWave (auto wave-height control);
• One pot/cart can be used on multiple machines of the same model and vintage (check with factory);
• Field upgradable

The ServoJet system ensures thorough flux penetration by utilizing concentric air atomization.  It offers a programmable method of applying flux that results in consistent flux deposition and reduced flux usage.  The ServoJet utilizes air atomized multiple jet technology that is 100% integrated into the wave soldering system software.  [servojet]

High end fluxer capabilities include:

• Precision selective fluxing capability  that applies different flux volumes to individual sections of the board;
• OA version available for aggressive water soluble type fluxes;
• Optional Dual Flux capability;
• User-defined automatic self-clean;
• Field upgradable.

ServoJet benefits include:

• Accurate flux control that reduces bridging;
• Improved hole penetration;
• Reduced flux consumption;
• Precision selective fluxing (standard ServoJet version);
• Optional dual flux capability for recipe-dependant conversion to a second flux for quick product change-over;
• 100% integrated into machine software providing data logging and trending capability;
• Applies to a wide range of fluxes.

The ServoSonic is a reciprocating ultrasonic atomizing spray fluxing system. It consists of an ultrasonic atomized spray nozzle and air impact nozzle with an automatic self-cleaning function. The titanium nozzle and horn assemblies make the ServoSonic an ideal solution for high solids and aggressive water soluble fluxes.

The ServoSonic benefits include:

• Ultrasonic atomized air delivery system;
• Ability to spray in one or both directions;
• Reduced flux consumption;
• Reduced maintenance costs;
• Selective flux capability;
• 100% integrated into wave solder machine software providing data logging and trending capability;
• Applies to a wide range of fluxes

ServoSpray provides an ideal balance between system performance, functionality and low cost of ownership. ServoSpray has the ability to spray in one or both directions, includes self-clean capability, and features a pressure tank flux supply system. ServoSpray utilizes atomized air delivery technology and is 100% integrated into the wave solder machine software.

ServoSpray benefits include:

• Ability to spray in one or both directions;
• Improved top side hole penetration;
• Reduced flux consumption;
• Reduced maintenance costs;
• Selective flux capability;
• Optional dual flux capability for recipe-dependant conversion to a second flux for quick product change-over;
• 100% integrated into machine software providing data logging and trending capability;
• Applies to a wide range of fluxes.

Electrovert’s nitrogen tunnel utilizes patented technology that inerts at the solder wave area only. This efficient approach maintains a very low oxygen environment of <50 ppm which is ideal for increased wetting effects and a significant reduction of dross.

Benefits of the nitrogen tunnel include:

• Significant reduction in dross and maintenance in the solder module area with pay-back in less than 6 months (depending on application and alloy)
• Minimal distance between preheat and solder contact area
• Inerted environment allows the use of milder fluxes and/or a reduced amount of flux applied
• Optional O2 analyzer enables data logging of critical parameters specific to the solder wave area
• Simple, efficient design provides easy access to solder module
• Short Tunnel is field upgradable (check with factory).

Electrovert's new Tunnel Heater option is a game-changer for manufacturers seeking enhanced preheat capabilities without increasing machine footprint. Designed for a full N2 tunnel environment, this patent-pending technology integrates flexible silicone heating elements into the existing space of the atmosphere isolation zone.

Key Benefits of the Tunnel Heater Option

• Extended Heated Length: The Tunnel Heater expands the total preheat length to 2.4 meters while maintaining the compact size of the machine.
• Optimized Temperature Control: Recipe-controlled temperature set-points and data reporting compatibility ensure seamless integration with MES information management systems.
• Superior Inerting Qualities: Maintains the inerting properties of the full N2 tunnel without compromise.
• Environmental Efficiency: Consumes less nitrogen N2 compared to other market technologies, supporting sustainability goals.

Electrovert's Tunnel Heater option is the perfect solution for improving preheat performance without compromising machine size or sustainability.

The patented UltraFill 4.0 solder nozzle is an ideal solution for lead-free soldering. The UltraFill 4.0 nozzle is 40% wider than traditional tin-lead nozzle to increase contact time. The nozzle placement reduces the temperature drop between nozzles and improves hole fill. UltraFill allows either air or nitrogen operation through the same design without switching nozzles. Nitrogen or air operation can be selected through the desired recipe, without the need to change nozzles (also available with the rotary chip nozzle).

Automation, defect reduction, repeatability, MES information management and simplified operation continue to be market drivers across all aspects of board assembly manufacturing. Electrovert’s patented Auto Exit Wing feature provides the level of automation that allows an automated adjustment of the laminar wave flow to match the board velocity for reduced defects. The recipe-controlled set-point ensures the wave dynamics are automatically adjusted ensuring wave flow dynamics are optimized for each PCB type and application.

Auto Exit Wing (English) - brochure

Auto Exit Wing (Chinese) - brochure

Click here to watch video

The Deep Wave option innovative system provides the ability to pump up to 20 mm wave height.  

The Deep Wave option overcomes the challenges associated with deep pockets and masking and provides a wave depth necessary to achieve topside hole fill.  In some applications the 20 mm capability has removed the need for an additional soldering process.  The Deep Wave is a recipe-controlled parameter in the machine software that can make changes between different wave heights within 10 seconds. The Deep Wave option complements other Electrovert value added options including ExactaWave (automatic wave height adjustment), adjustable wave pump RPM’s settings, forced convection blower speed adjustments and precision selective fluxing that can all be adjusted on-the-fly. 

Deep Wave - Brochure

The DwellFlex 4.0 is the first solder nozzle designed specifically with Industry 4.0 automation in mind. The patented design enables the length of the wave to be adjusted on-the-fly as variable board types are run through the wave. This ensures solder contact time is optimized for a high-mix of board types without changing conveyor speeds.

The DwellFlex 4.0 provides the highest level of soldering capability for thermally challenging and difficult solder applications. The single wave design at maximum opening delivers the most thermal energy and longest dwell time in the industry.

The DwellFlex 4.0 benefits include:

• Minimizes changeover downtime in high-mix applications
• Eliminates lost production time associated with conveyor speed changes
• Allows ability to optimize the profile through the preheat section and adjust wave contact time for an optimal soldering process
• Change contact length between high mass pcb’s to low mass pcb’s in less than 10 seconds
• Varying the wave length on-the-fly eliminates preheater changeover time
• Higher solder quality results – no temperature dip associated with the gap in a typical dual wave configuration
  • Reduced defect opportunities
  • Flexibility to provide precise dwell time for any board
• Available on Electra and VectraElite (EC4 and VC3)
• Compatible with full and short N2 tunnels
• Field upgradeable

Click here to watch the DwellFlex 4.0 video

DwellFlex 4.0 - Brochure

DwellMax 4.0 is a patented process solution that meets the challenges of lead-free wave soldering. The extra-wide chip nozzle and modified UltraFill 4.0 nozzle are ideal for soldering thick, high thermal mass circuit boards, increasing throughput capability. With conventional wave soldering technology, thick multi-layer and/or high thermal mass circuit boards are often accompanied by high cost from low yields, slow production speeds, rework costs, and the collateral damage associated with a rework loop. The innovative design of DwellMax 4.0 alleviates these problems and provides better PTH fill at significantly faster conveyor speeds. The benefits of the nitrogen tunnel include improved solder wetting and reduction in dross by up to 83%.

DwellMax 4.0 benefits include:

• Compatible with Full or Short Nitrogen Tunnel
• Increased topside hole fill;
• Reduced defect rates;
• Highest wave-height capability in industry;
• Higher production rates;
• Significantly less dross;
• Reduced solder usage;
• Reduced flux usage.

Electrovert’s DwellMax 4.0 is the key to a better bottom line through fewer defects and maximized productivity.

ExactaWave is a patented, high-reliability sensor with closed-loop feedback designed to control the solder wave height relative to the board. Its ability withstand temperatures up to 300° (573°F) makes it perfectly suited for precision soldering applications.

The ExactaWave system compensates for changes in solder level, dross accumulation and set-up changes made during maintenance. Thus, a set-point entered in a recipe always produces the same result. The ExactaWave’s seamless integration into the soldering machine’s software also allows it to operate in standby mode and is a parameter that can be data logged with trending capability.

Electrovert’s Electra, VectraElite, and VectraES2 offer a wide range of features and capabilities that increase the value of the wave solder process.  The value is achieved through reliability, features that provide process flexibility, maximize process control, and ultimately save time and money.

Value-based features include:

• Lifetime warranty on solder pot casting (applies to original owner);
• Recipe-driven automatic lead clearance;
• FloLift™ technology increases the upward force of the waves just as the PCB passes over the wave.  This feature promotes maximum topside hole fill;
• Stand-by-mode of solder waves that reduces the rpm of the solder wave just until the PCB is near the solder pot.  This feature reduces dross generation when no PCBs are being soldered;
• Combination 2d/1d bar code reader can be combined with data logging for complete process control and automation;
• Data-logging and trending of critical machine parameters;
• Common Windows® based operating system and common GUI software across all Electrovert products (Wave, Reflow, and Cleaning).  This is a significant time saver to operators and engineers.  Minimal training is required when shifting from one product to another.
• Common I/O interface across all Electrovert products (Wave, Reflow, and Cleaning).  This is significant to maintenance personnel and significant in that common spare parts can be used from one product to another.

Electrovert’s flux flow monitor is intended for applications that flux flow verification is critical to the wave soldering process. The feature provides an accurate method of verifying repeatability of the flux flow rate and flux volume on a board-to-board basis. The flux flow monitor uses an innovative non-contact type sensor. This approach allows the feature to be compatible across a broad range of flux types and spray technologies.

Flux Flow Monitor Features:

• Compatible with a broad range of flux types:
  • Alcohol and water based
  • Low to high solid content
  • Mild to highly corrosive
• Available on Electra, VectraElite, and VectraES (single and dual-head type fluxers)
  • ServoJet
  • ServoSpray
  • ServoSonic
• Feature is field upgradable (check with the factory on vintage and configuration of machine)

Flux Flow Monitor - Brochure

The Heavy Duty Conveyor is designed to handle heavier loads of up to 91 kg (200 lb) while still maintaining the benefits of a single continuous conveyor. The use of titanium universal V/L fingers with a choice of 3mm or 6mm L, along with precision linear bearing support cross shafts and fine-pitch screw shafts are robust with excellent parallelism for the conveyor. The high-strength hard-coat anodized aluminum extrusion used in the rail and tunnel support structure are field proven in demanding production environments for its durability and stability.

The Electra is capable of up to 2.4 meters (8 feet) of bottom side preheat and up to 1.8 meters (6 feet) of topside preheat.  Multiple forms of preheat are offered for complete process flexibility; these include IsoThermal™ forced convection, fast response IR, and Infrared radiant.  All preheat modules are ‘plug and play’, allowing preheat configurations to be located in any position, location, and 100% interchangeable.

Electrovert’s quick change solder pot allows the use of two or more alloys with easy change-over of interchangeable solder pots.  This feature is designed for safety, beginning with a robust cart that includes locking devices and safety bars to secure the pot.  The quick-change electrical and nitrogen utilities simplify change-over while the warming station (included) significantly reduces changeover time.

Quick-change pot benefits include:

• Use of multiple alloys;
• Built-in safety features;
• All critical process features of the wave solder machine remain integrated between the multiple solder pots:
  • Standard wave features such as FloLift, stand-by-mode, RPM control, alarms, and data logging;
  • Auto-lead clearance;
  • Optional ExactaWave (auto wave-height control);
• One pot/cart can be used on multiple machines of the same model and vintage (check with factory);
• Field upgradable

The ServoJet system ensures thorough flux penetration by utilizing concentric air atomization.  It offers a programmable method of applying flux that results in consistent flux deposition and reduced flux usage.  The ServoJet utilizes air atomized multiple jet technology that is 100% integrated into the wave soldering system software.  [servojet]

High end fluxer capabilities include:

• Precision selective fluxing capability  that applies different flux volumes to individual sections of the board;
• OA version available for aggressive water soluble type fluxes;
• Optional Dual Flux capability;
• User-defined automatic self-clean;
• Field upgradable.

ServoJet benefits include:

• Accurate flux control that reduces bridging;
• Improved hole penetration;
• Reduced flux consumption;
• Precision selective fluxing (standard ServoJet version);
• Optional dual flux capability for recipe-dependant conversion to a second flux for quick product change-over;
• 100% integrated into machine software providing data logging and trending capability;
• Applies to a wide range of fluxes.

The ServoSonic is a reciprocating ultrasonic atomizing spray fluxing system. It consists of an ultrasonic atomized spray nozzle and air impact nozzle with an automatic self-cleaning function. The titanium nozzle and horn assemblies make the ServoSonic an ideal solution for high solids and aggressive water soluble fluxes.

The ServoSonic benefits include:

• Ultrasonic atomized air delivery system;
• Ability to spray in one or both directions;
• Reduced flux consumption;
• Reduced maintenance costs;
• Selective flux capability;
• 100% integrated into wave solder machine software providing data logging and trending capability;
• Applies to a wide range of fluxes

ServoSpray provides an ideal balance between system performance, functionality and low cost of ownership. ServoSpray has the ability to spray in one or both directions, includes self-clean capability, and features a pressure tank flux supply system. ServoSpray utilizes atomized air delivery technology and is 100% integrated into the wave solder machine software.

ServoSpray benefits include:

• Ability to spray in one or both directions;
• Improved top side hole penetration;
• Reduced flux consumption;
• Reduced maintenance costs;
• Selective flux capability;
• Optional dual flux capability for recipe-dependant conversion to a second flux for quick product change-over;
• 100% integrated into machine software providing data logging and trending capability;
• Applies to a wide range of fluxes.

Electrovert’s nitrogen tunnel utilizes patented technology that inerts at the solder wave area only. This efficient approach maintains a very low oxygen environment of <50 ppm which is ideal for increased wetting effects and a significant reduction of dross.

Benefits of the nitrogen tunnel include:

• Significant reduction in dross and maintenance in the solder module area with pay-back in less than 6 months (depending on application and alloy)
• Minimal distance between preheat and solder contact area
• Inerted environment allows the use of milder fluxes and/or a reduced amount of flux applied
• Optional O2 analyzer enables data logging of critical parameters specific to the solder wave area
• Simple, efficient design provides easy access to solder module
• Short Tunnel is field upgradable (check with factory).

The patented UltraFill 4.0 solder nozzle is an ideal solution for lead-free soldering. The UltraFill 4.0 nozzle is 40% wider than traditional tin-lead nozzle to increase contact time. The nozzle placement reduces the temperature drop between nozzles and improves hole fill. UltraFill allows either air or nitrogen operation through the same design without switching nozzles. Nitrogen or air operation can be selected through the desired recipe, without the need to change nozzles (also available with the rotary chip nozzle).

Automation, defect reduction, repeatability, MES information management and simplified operation continue to be market drivers across all aspects of board assembly manufacturing. Electrovert’s patented Auto Exit Wing feature provides the level of automation that allows an automated adjustment of the laminar wave flow to match the board velocity for reduced defects. The recipe-controlled set-point ensures the wave dynamics are automatically adjusted ensuring wave flow dynamics are optimized for each PCB type and application.

Auto Exit Wing (English) - brochure

Auto Exit Wing (Chinese) - brochure

Click here to watch video

ExactaWave is a patented, high-reliability sensor with closed-loop feedback designed to control the solder wave height relative to the board. Its ability withstand temperatures up to 300° (573°F) makes it perfectly suited for precision soldering applications.

The ExactaWave system compensates for changes in solder level, dross accumulation and set-up changes made during maintenance. Thus, a set-point entered in a recipe always produces the same result. The ExactaWave’s seamless integration into the soldering machine’s software also allows it to operate in standby mode and is a parameter that can be data logged with trending capability.

Electrovert’s Electra, VectraElite, and VectraES2 offer a wide range of features and capabilities that increase the value of the wave solder process.  The value is achieved through reliability, features that provide process flexibility, maximize process control, and ultimately save time and money.

Value-based features include:

• Lifetime warranty on solder pot casting (applies to original owner);
• Recipe-driven automatic lead clearance;
• FloLift™ technology increases the upward force of the waves just as the PCB passes over the wave.  This feature promotes maximum topside hole fill;
• Stand-by-mode of solder waves that reduces the rpm of the solder wave just until the PCB is near the solder pot.  This feature reduces dross generation when no PCBs are being soldered;
• Combination 2d/1d bar code reader can be combined with data logging for complete process control and automation;
• Data-logging and trending of critical machine parameters;
• Common Windows® based operating system and common GUI software across all Electrovert products (Wave, Reflow, and Cleaning).  This is a significant time saver to operators and engineers.  Minimal training is required when shifting from one product to another.
• Common I/O interface across all Electrovert products (Wave, Reflow, and Cleaning).  This is significant to maintenance personnel and significant in that common spare parts can be used from one product to another.

Electrovert’s flux flow monitor is intended for applications that flux flow verification is critical to the wave soldering process. The feature provides an accurate method of verifying repeatability of the flux flow rate and flux volume on a board-to-board basis. The flux flow monitor uses an innovative non-contact type sensor. This approach allows the feature to be compatible across a broad range of flux types and spray technologies.

Flux Flow Monitor Features:

• Compatible with a broad range of flux types:
  • Alcohol and water based
  • Low to high solid content
  • Mild to highly corrosive
• Available on Electra, VectraElite, and VectraES (single and dual-head type fluxers)
  • ServoJet
  • ServoSpray
  • ServoSonic
• Feature is field upgradable (check with the factory on vintage and configuration of machine)

Flux Flow Monitor - Brochure

Electrovert’s full nitrogen tunnel with N2 injection technology feature offers complete process capability and flexibility for all nitrogen soldering applications. The full nitrogen tunnel feature is an efficient design that maintains a very low oxygen environment of <50 ppm which is ideal for increased wetting effects and a significant reduction of dross.

Benefits of the full nitrogen tunnel feature include:

• Available for use with UltraFill 4.0 and Chip 4.0 wave nozzles;
• Full N2 tunnel feature is compatible with forced convection and IR type preheats in any position and/or location;
• One single conveyor throughout the entire machine ensures a smooth product flow throughout the entire process and eliminates the concern of any additional maintenance that may be required due to split conveyor type systems;
• Significant reduction in dross and maintenance in the solder module area with pay-back in less than 6 months (depending on application and alloy);
• Minimal distance between preheat and solder contact area;
• Injected N2 into the preheat area expands process window, allows the use of milder fluxes and/or a reduced amount of flux applied;
• Optional O2 analyzer enables data logging of critical parameters specific to the solder wave area;
• Simple, efficient design provides easy access to preheaters and solder module

The Electra is capable of up to 2.4 meters (8 feet) of bottom side preheat and up to 1.8 meters (6 feet) of topside preheat.  Multiple forms of preheat are offered for complete process flexibility; these include IsoThermal™ forced convection, fast response IR, and Infrared radiant.  All preheat modules are ‘plug and play’, allowing preheat configurations to be located in any position, location, and 100% interchangeable.

Electrovert’s quick change solder pot allows the use of two or more alloys with easy change-over of interchangeable solder pots.  This feature is designed for safety, beginning with a robust cart that includes locking devices and safety bars to secure the pot.  The quick-change electrical and nitrogen utilities simplify change-over while the warming station (included) significantly reduces changeover time.

Quick-change pot benefits include:

• Use of multiple alloys;
• Built-in safety features;
• All critical process features of the wave solder machine remain integrated between the multiple solder pots:
  • Standard wave features such as FloLift, stand-by-mode, RPM control, alarms, and data logging;
  • Auto-lead clearance;
  • Optional ExactaWave (auto wave-height control);
• One pot/cart can be used on multiple machines of the same model and vintage (check with factory);
• Field upgradable

The ServoJet system ensures thorough flux penetration by utilizing concentric air atomization.  It offers a programmable method of applying flux that results in consistent flux deposition and reduced flux usage.  The ServoJet utilizes air atomized multiple jet technology that is 100% integrated into the wave soldering system software.  [servojet]

High end fluxer capabilities include:

• Precision selective fluxing capability  that applies different flux volumes to individual sections of the board;
• OA version available for aggressive water soluble type fluxes;
• Optional Dual Flux capability;
• User-defined automatic self-clean;
• Field upgradable.

ServoJet benefits include:

• Accurate flux control that reduces bridging;
• Improved hole penetration;
• Reduced flux consumption;
• Precision selective fluxing (standard ServoJet version);
• Optional dual flux capability for recipe-dependant conversion to a second flux for quick product change-over;
• 100% integrated into machine software providing data logging and trending capability;
• Applies to a wide range of fluxes.

The ServoSonic is a reciprocating ultrasonic atomizing spray fluxing system. It consists of an ultrasonic atomized spray nozzle and air impact nozzle with an automatic self-cleaning function. The titanium nozzle and horn assemblies make the ServoSonic an ideal solution for high solids and aggressive water soluble fluxes.

The ServoSonic benefits include:

• Ultrasonic atomized air delivery system;
• Ability to spray in one or both directions;
• Reduced flux consumption;
• Reduced maintenance costs;
• Selective flux capability;
• 100% integrated into wave solder machine software providing data logging and trending capability;
• Applies to a wide range of fluxes

ServoSpray provides an ideal balance between system performance, functionality and low cost of ownership. ServoSpray has the ability to spray in one or both directions, includes self-clean capability, and features a pressure tank flux supply system. ServoSpray utilizes atomized air delivery technology and is 100% integrated into the wave solder machine software.

ServoSpray benefits include:

• Ability to spray in one or both directions;
• Improved top side hole penetration;
• Reduced flux consumption;
• Reduced maintenance costs;
• Selective flux capability;
• Optional dual flux capability for recipe-dependant conversion to a second flux for quick product change-over;
• 100% integrated into machine software providing data logging and trending capability;
• Applies to a wide range of fluxes.

Electrovert’s nitrogen tunnel utilizes patented technology that inerts at the solder wave area only. This efficient approach maintains a very low oxygen environment of <50 ppm which is ideal for increased wetting effects and a significant reduction of dross.

Benefits of the nitrogen tunnel include:

• Significant reduction in dross and maintenance in the solder module area with pay-back in less than 6 months (depending on application and alloy)
• Minimal distance between preheat and solder contact area
• Inerted environment allows the use of milder fluxes and/or a reduced amount of flux applied
• Optional O2 analyzer enables data logging of critical parameters specific to the solder wave area
• Simple, efficient design provides easy access to solder module
• Short Tunnel is field upgradable (check with factory).

The patented UltraFill 4.0 solder nozzle is an ideal solution for lead-free soldering. The UltraFill 4.0 nozzle is 40% wider than traditional tin-lead nozzle to increase contact time. The nozzle placement reduces the temperature drop between nozzles and improves hole fill. UltraFill allows either air or nitrogen operation through the same design without switching nozzles. Nitrogen or air operation can be selected through the desired recipe, without the need to change nozzles (also available with the rotary chip nozzle).